mac2
Posted: Sun Jan 20, 2008 12:49 pm
My G4-500 sawtooth stated making some noise and vibrating a little bit. Tracked it down to the power supply fan. Can I take the fan out of the psu or do I have to replace the whole psu?
alk
Posted: Sun Jan 20, 2008 4:51 pm
You should be able to replace it, but it may require you to snip the power cable for the fan and splice in the new one. I recently replaced the fan in a digital audio power supply (it was seized) with a newer, quieter model. The fan doesn't have a power connector on the board in the power supply; it is soldered directly through the board. Replacing it was easy, though. Snip the old line, splice in the new line, put the lid back on the power supply, and it's good to go!
Peace,
Drew
_________________
Power to the PowerPC!
